Brother International IntelliFax-3550 Users Manual - English - Page 33
How to Set the Sleep Time
View all Brother International IntelliFax-3550 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
3550-US-5.0 HOW TO USE ON-SCREEN PROGRAMMING (OSP) AND HELP KEY How to Set the Sleep Time Sleep mode reduces power consumption when the machine is idle. The time period before the machine drops into sleep mode is user selectable. The following settings are available for sleep mode: You can select the time period before the machine drops into sleep mode from 00 to 99 minutes by using the number keys. The sleep timer is automatically reset when a fax is received, the machine starts to copy, or the machine is receiving PC data to print from Multi-Function Link. The factory setting is 0 minute. Use the following sequence to set up sleep time. KEYS TO PRESS 1. Press Function. You will see scrolling options on the display. Choose one. 2. Press 5. 3. Press 8. 4. Entersleeptime(00to99)byusing number keys. Example: 05. 5. Press Set. 6. Press Stop to exit. THE DISPLAY WILL SHOW: 01/01/1997 00:00 1.TEMP.SETTINGS 5.USER OPTIONS 8.SLEEP MODE SLEEP TIME:00MIN SLEEP TIME:05MIN 8.SLEEP MODE Ch. 3 NOTICE - Sleep Mode is activated when the heater stops. However, the cooling fan will continue to run until the machine has cooled down. The actual time before the fan stops will vary depending upon the operating conditions. - Itwilltakeapproximately12to30secondsforthemachinetowarmupfromsleep mode before you can start printing or copying. The LCD will show WARMING UP during this time. When the machine is ready it will automatically start the last job you entered. NOTE: Thecoolingfanwillcontinuetorununtilthetemperatureofthemachine reaches a certain level. Even after the heater stops, the machine will have to warm up before copying and printing. 3-9