Brother International IntelliFax-3550 Users Manual - English - Page 39
Storing Speed-Dial Numbers
View all Brother International IntelliFax-3550 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
3550-US-5.0 TELEPHONE FUNCTION SETTINGS Ch. 4 FOR YOUR INFORMATION Types of Numbers When you store a number as a One-Touch or as a Speed-Dial number, you have a choice of choosing the type of number. There are 4 options: 1. FAX (A fax number). 2. TEL (A telephone number). 3. F/T (Both a fax number and a telephone number) 4. CHAIN (A number, usually an access code, for chain dialing). Chain Dialing Chain dialing is used to store a very long dialing sequence. You can spread the number over two or more keys if you register the first key(s) in the sequence as type "Chain". Chain tells the system that the dialing sequence is not completed and that there is more to follow. The last key in the sequence must be any other dial type (either FAX, TEL or F/T). You can use any combination of One-Touch, Speed-Dial and manually dialed numbers in a chain. If you must wait for another dial tone at any point in the dialing sequence, store a pause at that point in the number by pressing the Pause/Redial key. (If you need a pause that is longer than 3.5 seconds, call our Fax Diagnostic Center at 1-800-2844329 (USA), 1-800-853-6660 (CANADA) for assistance.) Only one pause can be stored in each One-Touch and Speed-Dial number. When you are ready to dial the chain number, simply press the keys one after the other in sequence and then press the Start key. Chain dialing makes using access codes easy. Sometimes you may want to choose from among several long-distance carriers when you make a call; rates may vary depending upon the time and destination. To take advantage of low rates, you can store the access code of a long-distance carrier as you would a regular number and register it as a "chain" number. Then to dial, press this (access code) number followed by the regular number and the Start key. You can set up chain dialing for phone/credit card numbers, the same way. However, when using chain dialing, do NOT send a cover page because your credit card number will be on it. Storing Speed-Dial Numbers When you store a phone or fax number as a Speed-Dial number, you must enter a two-digit number, from 01 to 00 (00=100) for using the number keys. For example, you cannot enter "5". You must enter "05". You can store as many as 100 numbers as Speed-Dial numbers. KEYS TO PRESS 1. Press Function. 2. Press4. THE DISPLAY WILL SHOW: 09/12/1996 15:25 1.TEMP.SETTINGS 4.SET AUTO DIAL 4-6