Brother International IntelliFax-3550 Users Manual - English - Page 34
Telephonefunctionsettings
View all Brother International IntelliFax-3550 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
3550-US-5.0 TELEPHONE FUNCTION SETTINGS 4. TELEPHONE FUNCTION SETTINGS There are some settings, such as the date and time, you should set on your fax machine before you begin using it. Once entered, these settings will remain in the machine until you change them. You can begin customizing the settings by pressing Function on the control panel. This activates the function mode and On-Screen Programming prompts. You can complete a variety of settings in this mode. Setting the Dialing Mode (Tone/Pulse) Your fax machine supports both tone (multi-frequency) and pulse (rotary) dialing. It is initially set to TONE, so you do not have to change the setting if you use that kind of line. If you are using a pulse dial line, you can change the setting to PULSE by following the steps below: KEYS TO PRESS 1. Press Function. You will see scrolling options on the display. You can choose one. 2. Press6. 3. Press1. After two seconds you will be prompted to select pulse or tone. 4. Press Z (left arrow) or X (right arrow) to find the dialing mode that matches your telephone line. Example: PULSE. 5. Press Set. 6. Press Stop to return to the date and time. THE DISPLAY WILL SHOW: 01/01/1997 00:00 1.TEMP.SETTINGS 6.TEL OPTIONS 1.TONE/PULSE DIALING:TONE SELECT { } & SET DIALING:PULSE 1.TONE/PULSE Setting the Beeper Sound Level If the beeper setting is LOW or HIGH, it will "beep" every time you press a key, make an error, or at the end of sending or receiving a fax. The initial setting on your fax machine for the beeper is LOW. If you do not want the beeper on, select OFF, and if you want it loud, select HIGH. 4-1