Brother International IntelliFax-3550 Users Manual - English - Page 73
Setting the Print Density, Toner Save Function
View all Brother International IntelliFax-3550 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 73 highlights
3550-US-5.0 BASIC SETUP TO RECEIVE FAXES RECEIVING FAXES AND OTHER CALLS Setting the Print Density You can set print conditions with the following steps. Press Z (left arrow) to make the print lighter and X (right arrow) to make the print darker . If the print is still too light or too dark, you can adjust it further by turning the Print Density Dial located in the right corner under the top cover. (Remove the drum unit to find the dial. See page 13-12 for more information.) KEYS TO PRESS 1. Press Function. 2. Press 5. 3. Press 9. The display will alternate messages. 4. Use Z (left arrow) or X (right arrow) to change the settings. 5. Press Set. 6. Press Stop to exit. THE DISPLAY WILL SHOW: 09/12/1996 15:25 1.TEMP.SETTINGS 5.USER OPTIONS 9.PRINT DENSITY -sssssss + SELECT { } & SET 9.PRINT DENSITY Toner Save Function This function lets you extend the life of the toner by conserving its use. When the Toner Save is set to ON, the print appears somewhat lighter. This feature is also available when copying. The default setting is OFF. KEYS TO PRESS 1. Press Function. 2. Press 5. 3. Press 7. 4. Press Z (left arrow) or X (right arrow) to select either ON or OFF. Example: ON. 5. Press Set. 6. Press Stop to exit. THE DISPLAY WILL SHOW: 09/12/1996 15:25 1.TEMP.SETTINGS 5.USER OPTIONS 7.TONER SAVE TONER SAVE:OFF SELECT { } & SET TONER SAVE:ON 7.TONER SAVE Ch. 7 7-8