Brother International IntelliFax-3550 Users Manual - English - Page 88
How To Use The Copy Function
View all Brother International IntelliFax-3550 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 88 highlights
3550-US-5.0 HOW TO USE THE COPY FUNCTION 8. HOW TO USE THE COPY FUNCTION Making Single and Multiple Copies Use this function to make a single copy or multiple copies. When making copies, make sure the text or image on the original document is not too close to the edge. Your fax machine can not read anything closer than 1/8 inch (4 mm) from the edge of the paper. Original documents should be straight and not wrinkled or they may jam. Also, do not pull on the paper while copying is in propress. This may distort the image and damage your machine. Set the resolution to either PHOTO, FINE or S.FINE. If you select STANDARD, the resolution will change automatically to S.FINE. However, when you make a single copy and select S.FINE, the resolution may change automatically to FINE in case memory is used for memory transmission. Make sure there is enough recording paper in the machine. And when making multiple copies, do not let the receiving tray become overstacked. Remove copied paper from the receiving tray frequently. NOTE: If you purchase the optional 1 or 2 MB of memory for your machine, the copy function will include an additional step allowing you to sort multiple copies. Making a Single Copy Use this function to make a single copy. KEYS TO PRESS 1. Insert the documents face down into the feeder. 2. Press Copy. 3. Press Copy or just wait for 5 seconds. THE DISPLAY WILL SHOW: 09/12/1996 15:25 FAX: NO. & START COPY: PRESS COPY NO.OF COPIES:01 ENTER & COPY KEY COPYING COPYING P.01 COPYING P.02 8-1