Brother International PC-8500 Users Manual - English - Page 128
Embroidering from a specific starting point, Changing the pattern direction
View all Brother International PC-8500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 128 highlights
Setting Up Sewing Utility Stitches Characters and Decorative Stitches Embroidering from a specific starting point CAUTION After a starting position has been rotated, check the display to see which embroidery frames can be used. If an embroidery frame which is not displayed is used, the embroidery foot may touch the frame, or personal injury may result. 1. Make a mark at the starting position on the fabric in the frame as shown in the illustration. The mark cannot be too close to the edge of the frame as the presser foot prevents the needle from getting very close to the frame. 2. Touch the " " key. The needle will move to the starting position. (The embroidery frame will move.) 3. Use the arrow keys to align the mark with the hole in the embroidery foot, and then start embroidering. Embroidering Editing Embroidery Patterns Retrieving My Custom Stitch TM Error Maintenance Messages Trouble shooting Sewing Chart Changing the pattern direction The pattern will be rotated clockwise in 90˚ steps as shown in the illustration at left each time the " " key is touched. * Some patterns may be too long to be rotated 90°. In such cases, the patterns can be rotated by 180° only. CAUTION After a pattern has been rotated, check the display to see which embroidery frames can be used. If an embroidery frame which is not displayed is used, the embroidery foot may touch the frame, or personal injury may result. ABC ABC 125 Patterns (Programmed in Machine) Patterns (Memory Card)