Brother International PC-8500 Users Manual - English - Page 20
Slide the speed range control lever to its maximum as far - bobbin winder
View all Brother International PC-8500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
Setting Up Sewing Utility Stitches Characters and Decorative Stitches Embroidering 2 1 1 4. Align the groove in the bobbin with the spring on the shaft and place the bobbin on the bobbin winder shaft. Then, push the bobbin winder shaft to the right. 1 Spring on the shaft 2 Groove of the bobbin 2 5. Wind the thread clockwise around the bobbin four or five times, pass the end of the thread through the slit in the 1 bobbin winder seat, and then pull the thread in the direction shown in the illustration. Use the cutter to cut the thread. 2 1 Bobbin winder seat 3 1 6. Slide the speed range control lever to its maximum (as far to the right as possible). 7. Press the "START/STOP" button. The machine will stop automatically when the bobbin is full. 8. After the bobbin has stopped moving, press the "START/STOP" button to stop the machine. 9. Cut the thread, slide the bobbin winder shaft to the left and remove the bobbin. Editing Embroidery Patterns Retrieving My Custom Stitch TM Error Maintenance Messages Trouble shooting Sewing Chart Patterns (Programmed in Machine) Patterns (Memory Card) 17