Brother International PC-8500 Users Manual - English - Page 39
Sewing, Trial Sewing
View all Brother International PC-8500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
Setting Up Sewing Utility Stitches Characters and Decorative Stitches Embroidering Editing Embroidery Patterns 1. SEWING TRIAL SEWING Sewing by using "UTILITY STITCH" 6 6* 54 2 CHAPTER 2 CAUTION - Be aware of the needle at all 1 times while sewing, and keep your hands away from all moving parts such as the 3 needle, balance wheel and thread take-up lever, otherwise injury may result. - Do not pull or push the fabric too hard while sewing, otherwise injury may result. - Never use bent needles. Such needles can easily break, which could result in injury. 1 2 34 A 75/11 needle is inserted into the machine at the factory. 1. When the machine is turned on, the straight stitch (left) is 5 always selected. 6 1 Replace with the presser foot with the letter indicated. 7 2 This indicates the pattern being selected. 8 3 If you touch this key before sewing, reverse stitches (reinforcement stitches) will be sewn automatically. (Refer to page 38.) 9 0 A 4 If you touch this key before sewing, the thread will be automatically cut at the finish of sewing. (Refer to page 39.) 5 An advice screen will appear if you touch this key while sewing. (Refer to page 42.) 6 This selects the appropriate pattern for the sewing application and also displays the operation steps. (Refer to page 40.) 7 Touch this key to return to the previous page. 8 Touch this key to move to the next page. 9 Touch these keys to adjust the stitch width setting. 0 Touch these keys to adjust the stitch length setting. A Touch these keys to change the thread tension. Retrieving My Custom Stitch TM Error Maintenance Messages Trouble shooting Sewing Chart Patterns (Programmed in Machine) Patterns (Memory Card) 36