Brother International PC-8500 Users Manual - English - Page 173
Always keep the machine clean., Turn the balance wheel towards you,
View all Brother International PC-8500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 173 highlights
Setting Up Sewing Always keep the machine clean. 5 1. Turn off the power and remove the presser foot holder and the needle. Utility Stitches Characters and Decorative Stitches Embroidering Editing Embroidery Patterns Retrieving My Custom Stitch TM Error Maintenance Messages 3 5 1 1 2 2. Loosen the screws. Using the metal disk provided. 3. Remove the needle plate. 1 Needle plate 4. Turn the balance wheel towards you, and align the notch of shuttle with the shelf of race edge angle, and remove the shelf of race. 1 Notch of shuttle 2 Shelf of race 5 6 1 2 12 170 5. Take out the shuttle. 6. Remove accumulated lint and thread from the inner shuttle and race with a brush or a vacuum cleaner. 1 Race 2 Shuttle 7. Set the shuttle by aligning the shuttle projection with spring of the stopper. 1 Projection 2 Spring * Lint and dust accumulated in the race will sometimes cause poor stitching or malfunction of bobbin thread sensor. Trouble shooting Sewing Chart Patterns (Programmed in Machine) Patterns (Memory Card)