Canon imageRUNNER 1025 Series Basic Operation Guide - Page 115

Copying Erasing Shadows/Lines Original Frame Erase This mode erases the dark borders and frame lines that appear around the copy if the original is smaller than the selected paper size. You can also use this mode to create a blank border around the edge of the copy. The Original Frame Erase mode cannot be used with the 2 on 1 mode. 1 Set originals. 6 Press [ ] or [ ] to set the frame erase width for all four borders, then press [OK]. ALL FR.SAME WD 1/ 8" The width ranges 1/16" to 1 15/16" (1 to 50 mm). 7 Enter the desired copy quantity (1 to 99) using - [numeric keys]. 100% * A TEXT LTR 01 For details, see "Placing Originals," on p. 2-4. 2 Press [COPY]. 3 Press [Frame Erase]. 4 Press [ ] or [ ] to select , then press [OK]. FRAME ERASE OLIGINAL FR. 8 Press [Start]. If you want to copy multiple originals using the platen glass, set an original and press [Start] for each original, once for each page. To cancel all settings, press [Reset]. 5 Press [ ] or [ ] to select the size of the original, then press [OK]. OLIGINAL SIZE LTR 4-28