Canon imageRUNNER 1025 Series Basic Operation Guide - Page 305

Settings Menu Setting Item Description Applicable Page 6. SPECIAL MODE N When the two-sided printing function is used, paper may curl severely or become jammed. Enable this setting to prevent paper curling or jamming. - OFF - ON e-Manual "Maintenance" 7. SPECIAL MODE P Sets to activate when lightweight paper or paper which is easy to get uneven print density is used for printing. - OFF - ON 8. SPECIAL MODE S Sets whether to reduce the waiting time for the next printout. When you change the paper size after continuous printing, the machine may take a while to start the next printing. OFF Does not reduce the waiting time next set of printout. (default) SPEED PRIORITY Reduces the waiting time to start the next set of printout. Print speed has priority; however, it is possible that a previously printed image may be printed faintly on the next output. 9. CONT. PRINT MODE Sets whether to prevent the back edge of the previous page from appearing on the following page during continuous printing of half-tone prints or photographs. - OFF - ON 10. BACK EDGE MODE Sets whether to prevent back edge of paper from smudging. - OFF - ON 11. LARGE PAPER MODE Sets whether to improve toner fix on large size paper. - OFF - ON 12. AUTO ADF DRTY ADJ*1 Sets whether to activate smudge (due to dust or dirt) reduction during printing. When the ADF is dirty, copies may contain unwanted dots or lines. - ON - OFF 13. MAINTENANCE CODE This setting is not functional in this model. *1 Not applicable for imageRUNNER1025. Machine Settings REPORT SETTINGS Setting Item 1. SETTINGS*1 1. TX REPORT PRINT ERROR ONLY Description Sets the report functions. Sets whether the transmission report prints out. Prints a report only when a transmission error occurs. Applicable Page p. 5-66 14-22