Canon imageRUNNER 1025 Series Basic Operation Guide - Page 116
Book Frame Erase
View all Canon imageRUNNER 1025 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 116 highlights
Copying Erasing Shadows/Lines Book Frame Erase This mode erases the dark borders and the center and contour lines that appear when you copy facing pages in a book or bound original onto a single sheet of paper. - The Book Frame Erase mode cannot be used with the 2 on 1 mode. - You must place an original on the platen glass when using this function. 1 Set an original on the platen glass. 6 Press [ ] or [ ] to set the book frame erase width for all four borders, then press [OK]. For details, see "Placing Originals," on p. 2-4. 2 Press [COPY]. 3 Press [Frame Erase]. 4 Press [ ] or [ ] to select , then press [OK]. ALL FR.SAME WD 1/ 8" The book frame erase width ranges 1/16" to 1 15/16" (1 to 50 mm). 7 Press [ ] or [ ] to set the book frame erase width for the center of the book, then press [OK]. ERASE WIDTH CNTR 3/ 8" The width ranges 1/16" to 1 15/16" (1 to 50 mm). 8 Enter the desired copy quantity (1 to 99) using - [numeric keys]. FRAME ERASE BOOK FRAME 100% * A TEXT LTR 01 5 Press [ ] or [ ] to select the book size, then press [OK]. FACING-PAGE SIZE LTR 9 Press [Start]. If you want to copy multiple originals using the platen glass, set an original and press [Start] for each original, once for each page. To cancel all settings, press [Reset]. 4-29