Canon imageRUNNER 1025 Series Basic Operation Guide - Page 239

Department ID Management 8 Press [ ] or [ ] to select , then press [OK]. REGISTER DEPT. ID 1.PASSWORD 9 Enter the password using - [numeric keys], then press [OK]. PASSWORD 0000000 - If you make a mistake when entering a number, press and hold [Clear] to clear the entire number, then enter the correct number. - The maximum number of digits that you can store for the password is seven. If you enter fewer than seven digits for either setting, the machine stores them with leading zeros. • Example: If is entered, is stored. - You cannot register a password with only zeros as the number, such as . If you enter a number that begins with zeros, the leading zeros are ignored. • Example: If or is entered, is stored. 10 Press [ ] or [ ] to select , then press [OK]. REGISTER DEPT. ID 2.PAGE LIMIT SET. 11 Press [ ] or [ ] to select the desired function, then press [OK]. PAGE LIMIT SET. 1.TOTAL PRINT You can select , , , , or . - is the sum of and . - The pages of received fax/I-fax documents and automatically printed reports are not counted as prints. 12 Press [ ] or [ ] to select (when is selected), then press [OK]. TOTAL PRINT 1.RESTRICT TOTAL The message displayed will vary depending on which function you selected in step 11. Example: appears when is selected. 13 Press [ ] or [ ] to select or , then press [OK]. RESTRICT TOTAL ON : Does not set a page limit restriction. Skip to step 16. : Sets a page limit restriction. System Manager Settings 11-8