Canon imageRUNNER 1025 Series Basic Operation Guide - Page 168
ECM Transmission
View all Canon imageRUNNER 1025 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 168 highlights
Fax (imageRUNNER 1025iF Only) ECM Transmission ECM (Error Correction Mode) reduces the effect of system and line errors on documents that occur during sending or receiving with another fax machine that supports ECM. If the other machine does not support ECM, this setting is ignored. If transmission speed appears to be extremely slow, you may be able to speed up transmission time by turning ECM off. The default setting is . - If you want to transmit using ECM, it is necessary that ECM Transmission be set in both the destination machine and this machine. This function does not operate unless ECM is set in both machines. - Even when ECM is set, errors can sometimes occur due to a poor telephone line connection. - If there is trouble with the line, it will take more time to send the documents. 1 Press [Additional Functions]. 2 Press [ ] or [ ] to select , then press [OK]. ADD. FUNCTIONS 3.TX/RX SETTINGS 3 Press [ ] or [ ] to select , then press [OK]. TX/RX SETTINGS 2.FAX SETTINGS 6 Press [ ] or [ ] to select or , then press [OK]. ECM TX ON : The ECM transmission is not activated. : The ECM transmission is activated. 7 Press [Stop] to return to the standby mode. 4 Press [ ] or [ ] to select , then press [OK]. FAX SETTINGS 2.TX SETTINGS 5 Press [ ] or [ ] to select , then press [OK]. TX SETTINGS 1.ECM TX 5-45