Canon imageRUNNER 1025 Series Basic Operation Guide - Page 294
Sets whether the ECM Error Correction Mode reception is, F/T SWITCH ACTION
View all Canon imageRUNNER 1025 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 294 highlights
Settings Menu Setting Item 3. AUTO REDIAL ON 1. REDIAL TIMES 2. REDIAL INTERVAL 3. TX ERROR REDIAL OFF 4. TIME OUT 5. DIALING LINE CHCK 3. RX SETTINGS 1. ECM RX 2. RX MODE 3. FAX/TEL OPT. SET 1. RING START TIME 2. F/T RING TIME 3. F/T SWITCH ACTION Description Sets whether to redial automatically when the other line is busy or a transmission error occurs. Customizes the redial operation. Sets the number of retries. (1TIMES-10TIMES) Sets period of time before redialing. (2MIN.-99MIN.) Sets whether the machine redials automatically when transmission error occurs. - ON - OFF After the first attempt at dialing fails, redialing is not attempted. Sets whether to scan a document automatically after specifying the destination. (This function is not available when you dial with - [numeric keys].) - OFF - ON Sets whether to check the telephone line condition. - OFF - ON Sets the reception features. Sets whether the ECM (Error Correction Mode) reception is activated. - ON - OFF Selects the receive mode. - FaxOnly - FaxTel - AnsMode - DRPD - Manual Sets the optional items in the mode. Sets the time the machine takes to check whether a call is a fax or a voice call. (0SEC-30SEC) Selects the ring length for voice calls. (15SEC-300SEC) Selects whether the machine switches to the receive mode after the ring time has elapsed, or whether if disconnects the call. - RECEIVE - DISCONNECT Applicable Page p. 5-46 - p. 5-48 p. 5-55 p. 5-11 p. 5-55 Machine Settings 14-11