Canon imageRUNNER 1025 Series Basic Operation Guide - Page 82
HOST NAME, CODED SPD DIAL, server1, HOST NAME, FILE PATH, server1/home/share, FILE PATH, LOGIN NAME
View all Canon imageRUNNER 1025 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 82 highlights
Registering Destinations in the Address Book (imageRUNNER 1025iF Only) 8 Confirm that is displayed, then press [OK]. CODED SPD DIAL 2.HOST NAME 9 Enter the name of the file server on the network (up to 120 characters) using - [numeric keys], then press [OK]. If no DNS server is available, the host name setting should be specified using the IP address of the FTP server. Ex. HOST NAME :1 server1 10 Confirm that is displayed, then press [OK]. CODED SPD DIAL 3.FILE PATH 11 Enter the file path to the folder to which the job is to be sent (up to 120 characters) using - [numeric keys], then press [OK]. Ex. FILE PATH :a server1/home/share Storing/Editing Coded Dial Codes 13 Enter the login name using - [numeric keys], then press [OK]. Ex. LOGIN NAME :a canon You can enter up to 24 characters for the login name. 14 Confirm that is displayed, then press [OK]. CODED SPD DIAL 5.PASSWORD 15 Enter the password using - [numeric keys], then press [OK]. Ex. PASSWORD :a 123XXXX You can enter up to 24 characters (14 characters when is selected as the server protocol) for the password. To register another coded dial code, repeat the procedure from step 4. 16 Press [Stop] to return to the standby mode. 12 Confirm that is displayed, then press [OK]. CODED SPD DIAL 4.LOGIN NAME 3-19