Canon imageRUNNER 1025 Series Basic Operation Guide - Page 97

Selecting Paper Source Using the Stack Bypass with Irregular Sizes of Paper This section describes how to copy onto nonstandard size paper using the stack bypass. If in is set to , the display to specify the paper size and type for the stack bypass appears every time you load paper on the stack bypass. If is set to , copying can be performed only for the registered paper size and type. (See "Setting Paper Type and Size," on p. 2-13.) 1 Set originals. 5 Press [ ] or [ ] to select , then press [OK]. SELECT PAPER SIZE FREESIZE 6 Enter the vertical size in (76 to 216 mm (3 to 8 1/2 inch)) using - [numeric keys], then press [OK]. VERTICAL SIZE 76 MM For details, see "Placing Originals," on p. 2-4. 2 Press [COPY]. 3 Press [Paper Select] repeatedly to select the stack bypass. The paper select indicator of the selected paper source lights. (See "Operation Panel," on p. 1-5.) 4 Load the paper into the stack bypass. 7 Enter the horizontal size in (127 to 356 mm (5 to 14 1/8 inch)) using - [numeric keys], then press [OK]. HORIZONAL SIZE 127 MM You can also press [ ] or [ ] to specify the size. ( represents the length of the paper that feeds into the machine.) Copying 4-10