Canon imageRUNNER 1025 Series Basic Operation Guide - Page 147
Using Coded Dial Codes, Coded Dial] .
View all Canon imageRUNNER 1025 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 147 highlights
Fax (imageRUNNER 1025iF Only) Specifying Destinations 4 Press [Start]. If the message appears, press [ ] or [ ] to select the original size, then press [Start] for each original. When scanning is complete, press [OK] to start sending. - When is set to in in in , and if you have specified the destination by any other method than using - [numeric keys], the machine starts scanning automatically without pressing [Start], after the preset time for this setting is elapsed. - You can also adjust the following scan settings as necessary, using the keys on the operation panel, after specifying the destination in step 3. • Image Qaulity: See "Selecting Image Quality," on p. 5-29. • Density: See "Adjusting Density," on p. 5-30. • 2-Sided: See "2-Sided Originals," on p. 5-31. Using Coded Dial Codes You can specify up to 177 destinations using coded dial codes. - To use this feature, you must first register destinations in coded dial code. (See "Storing/Editing Coded Dial Codes," on p. 3-14.) - A maximum of 201 destinations can be specified at the same time. (Out of the 200 destinations, a number or address can be specified with the numeric keys.) If you specify a group, which is made up of several destinations, each destination in the group is counted as a separate address. 1 Place the original on the platen glass or load it in the ADF. 4 Enter the desired three-digit code (000 to 176) with - [numeric keys]. Ex. INPUT CODED NUMBER [*001] 2 Press 3 Press [SEND]. [Coded Dial] . ˙If you enter a wrong code: Press [Clear] and try again from step 3. ˙If you specify an I-fax address: You can enter the optional settings by pressing [OK]. (See"Send Settings," on p. 543.) =John [*001]012XXXXXXX 5-24