Canon imageRUNNER 1025 Series Basic Operation Guide - Page 95

Selecting Paper Source 5 Press [Start]. If you want to copy multiple originals using the platen glass, set an original and press [Start] for each original, once for each page. - You can set whether to change to another paper source of the same size if the current paper source runs out while processing a job. You can set whether to select the appropriate paper source based on the original size and copy ratio settings (Auto Drawer Select function) in of in . By setting each paper source (, (optional) or ) to , you can activate the Auto Drawer Select function for each paper source. - You can set the default paper source for copying (, , or (optional)) in of in . Using the Stack Bypass with Standard Paper Sizes This section describes how to copy onto standard size paper using the stack bypass. If in is set to , the display to specify the paper size and type for the stack bypass appears every time you load paper on the stack bypass. If is set to , copying can be performed only for the registered paper size and type. (See "Setting Paper Type and Size," on p. 2-13.) 1 Set originals. 3 Press [Paper Select] repeatedly to select the stack bypass. The paper select indicator of the selected paper source lights. (See "Operation Panel," on p. 1-5.) 4 Load the paper into the stack bypass. Copying For details, see "Placing Originals," on p. 2-4. 2 Press [COPY]. 4-8