Canon imageRUNNER 1025 Series Basic Operation Guide - Page 177

Fax (imageRUNNER 1025iF Only) Specifying Printing When Toner Runs Out You can set if the machine stores all documents in memory or continue printing without storing documents in memory, when the toner runs out. The default setting is . - When the message appears, if you set to , you can continue printing. The printed documents may be light or blurred because of lack of toner. The data is erased when the documents are printed out, so you cannot print the same documents again. - When the message appears, if you set to , the machine stores all documents in memory. After the toner cartridge is replaced, the documents can be printed and the setting can be reset. 1 Press [Additional Functions]. 2 Press [ ] or [ ] to select , then press [OK]. ADD. FUNCTIONS 3.TX/RX SETTINGS 3 Press [ ] or [ ] to select , then press [OK]. TX/RX SETTINGS 1.COMMON SETTINGS 6 Press [ ] or [ ] to select or , then press [OK]. CONT. PRINTING RX TO MEMORY : The machine stores all documents in memory. : You can continue printing. 7 Press [Stop] to return to the standby mode. 4 Press [ ] or [ ] to select , then press [OK]. COMMON SETTINGS 2.RX SETTINGS 5 Press [ ] or [ ] to select , then press [OK]. RX SETTINGS 3.CONT. PRINTING 5-54