Canon imageRUNNER 1025 Series Basic Operation Guide - Page 310
Set Ip Add Range, Rx Mac Add Set.
View all Canon imageRUNNER 1025 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 310 highlights
Settings Menu Setting Item 2. RAW 3. HTTP 4. SMTP RX 5. POP3 RX 6. FTP SENDING 7. SMTP TX 8. SNMP 14. SET IP ADD RANGE OFF ON 1. PERMIT/REJECT 2. SET IP ADDRESS 15. RX MAC ADD SET. OFF ON 2. SMB SETTINGS*2 1. USE SMB CLIENT OFF ON 1. SERVER 2. WORKGROUP 3. COMMENT 4. LM ANNOUNCE 3. SNMP SETTINGS Description Applicable Page 0-65535 (default:9100) 0-65535 (default:80) e-Manual "Network Settings" 0-65535 (default:25) 0-65535 (default:110) 0-65535 (default:21) 0-65535 (default:25) 0-65535 (default:161) Sets whether to restrict the range of IP addresses. Disables restriction of IP address of computers. Enables restriction of IP address of computers from which data (print/fax jobs) can be sent to the machine. Selects whether to permit or reject access from a specified IP address. - REJECT - PERMIT Specifies the IP address range. and must be entered for each setting. - 1. IP ADDRESS 1 - 2. IP ADDRESS 2 - 3. IP ADDRESS 3 - 4. IP ADDRESS 4 Sets whether to activate a MAC address filter. Disables a MAC address filter. Specifies a MAC address filter to access. A MAC address must be entered for each setting. - 1. PERMIT RX ADD1 - 2. PERMIT RX ADD2 - 3. PERMIT RX ADD3 - 4. PERMIT RX ADD4 - 5. PERMIT RX ADD5 Sets the SMB settings to use the machine on a NetBIOS network. Sets if SMB client is used. SMB client is not used. SMB client is used. Enters the NetBIOS name of the machine. Enters the name of the workgroup the machine belongs to. Enters a comment about the printer. Sets if the machine notifies the LAN Manager of its existence. - OFF - ON Sets detailed information about SNMP. Machine Settings 14-27