Canon imageRUNNER 1025 Series Basic Operation Guide - Page 144
Specifying Destinations, Using Numeric Keys
View all Canon imageRUNNER 1025 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 144 highlights
Fax (imageRUNNER 1025iF Only) Specifying Destinations This section describes how to specify a fax or I-fax destination. You can select a destination stored in the Address Book or a one-touch key, a coded dial code, or specify a new destination. Using Numeric Keys You can specify a new fax number, or I-fax address using - , , [numeric keys]. 1 Place the original on the platen glass or load it in the ADF. 2 Press [SEND]. 3 Press [ ] or [ ] to select or , then press [OK]. ˙If you specify an I-fax address: You can enter the optional settings by pressing [OK]. (See"Send Settings," on p. 543.) Ex. ADDRESS :a [email protected] SELECT SEND METHOD FAX 4 Enter the fax number or I-fax address using - , and [numeric keys], then press [OK]. Ex. FAX NUMBER =012XXXXXXX ˙If you enter a wrong number when specifying a fax number: Go back to the wrong digit with [ ]. ˙If you enter a wrong character when specifying an I-fax address: Go back to the wrong character with [ ], then press [Clear]. Or press and hold [Clear] to delete the entire entry. If in in is set to and you specify a fax number using - [numeric keys], you must enter the fax number again for confirmation. Enter the same fax number you entered in step 4, then press [OK]. 5 Press [Start]. If the message appears, press [ ] or [ ] to select the original size, then press [Start] for each original. When scanning is complete, press [OK] to start dialing. You can also adjust the following scan settings as necessary, using the keys on the operation panel, after specifying the destination in step 4. - Image Qaulity: See "Selecting Image Quality," on p. 5-29. - Density: See "Adjusting Density," on p. 5-30. - 2-Sided: See "2-Sided Originals," on p. 5-31. 5-21