Canon imageRUNNER 1025 Series Basic Operation Guide - Page 44
Setting the Auto Clear Time, Setting the Daylight Saving Time, Additional Functions].
View all Canon imageRUNNER 1025 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
Before Using the Machine Timer Settings Setting the Auto Clear Time If the machine remains idle for a certain period of time, the display returns to the standby mode (Auto Clear function). This section describes how to set the period of time until the display returns to the standby mode. The default settings are and . 1 Press [Additional Functions]. 4 Confirm that is displayed, then press [OK]. 2 Press [ ] or [ ] to select , then press [OK]. AUTO CLEAR TIME ON ADD. FUNCTIONS 6.TIMER SETTINGS 5 Press [ ] or [ ] to select the desired interval, then press [OK]. 3 Press [ ] or [ ] to select , then press [OK]. TIMER SETTINGS 5.AUTO CLEAR TIME AUTO CLEAR TIME 2MIN. You can set the interval from 1 to 9 minutes (in one minute increments). You can also enter values using - [numeric keys]. 6 Press [Stop] to return to the standby mode. Setting the Daylight Saving Time In some countries or areas, time is advanced throughout the summer season. This is called "Daylight Saving Time." This section describes how to set the Daylight Saving Time. The default setting is . 1 Press [Additional Functions]. 2 Press [ ] or [ ] to select , then press [OK]. 4 Press [ ] or [ ] to select , then press [OK]. DAYLIGHT SV.TIME ON ADD. FUNCTIONS 6.TIMER SETTINGS 3 Press [ ] or [ ] to select , then press [OK]. 5 Confirm that is displayed, then press [OK]. DAYLIGHT SV.TIME 1.START DATE/TIME TIMER SETTINGS 6.DAYLIGHT SV.TIME 1-15