Canon imageRUNNER 1025 Series Basic Operation Guide - Page 252
Interior, Cleaning the Fuser Roller
View all Canon imageRUNNER 1025 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 252 highlights
Cleaning the Machine Interior Clean the machine's print area periodically to prevent toner powder and paper dust from accumulating inside. ˔ Cleaning the Fuser Roller If black streaks appear with printing, the fuser roller in the main unit may be dirty. Should this occur, clean the fuser roller in the following procedure. The roller should also be cleaned each time the toner cartridge is replaced. Load a sheet of blank LTR paper into the stack bypass and start cleaning. Cleaning the roller takes approximately 100 seconds. 1 Press [Additional Functions]. 2 Press [ ] or [ ] to select , then press [OK]. ADD. FUNCTIONS 7.ADJUST./CLEANING 3 Open the stack bypass. 5 Load a sheet of blank LTR paper. 6 Press [ ] or [ ] to select , then press [OK]. ADJUST./CLEANING 3.FIX.UNIT CLEANING Cleaning starts. When finished, the display returns to the standby mode. 4 Pull out the stack bypass extension until it clicks, then open it. - Use standard paper as the cleaning paper. - Throw away the cleaning paper after use. Maintenance 12-3