Canon imageRUNNER 1025 Series Basic Operation Guide - Page 236

7 Enter the System Password using - [numeric keys], then press [OK]. Ex. SYSTEM PASSWORD 111XXXX Specifying the System Manager Settings 9 Enter the System Manager's name using - [numeric keys], then press [OK]. Ex. SYSTEM MANAGER :a Administrator - If you make a mistake when entering a number, press and hold [Clear] to clear the entire number, then enter the correct number. - The maximum number of digits that you can store for System Password is seven. If you enter fewer than seven digits for either setting, the machine stores them with leading zeros. • Example: If is entered, is stored. - You cannot store a System Password with only zeros as the number, such as . If you enter a number that begins with zeros, the leading zeros are ignored. • Example: If or is entered, is stored. 8 Press [ ] or [ ] to select , then press [OK]. SYS. MANAGER INFO 3.SYSTEM MANAGER - If you make a mistake when entering a character, press [Clear] to delete the character before the cursor position, then enter the correct character. - You can enter a maximum of 32 characters for the System Manager's name. 10 Press [Stop] to return to the standby mode. System Manager Settings 11-5