Canon imageRUNNER 1025 Series Basic Operation Guide - Page 71
HOST NAME, TOUCH SPD DIAL, server1, FILE PATH, server1/home/share, LOGIN NAME, canon, PASSWORD
View all Canon imageRUNNER 1025 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 71 highlights
Registering Destinations in the Address Book (imageRUNNER 1025iF Only) Storing/Editing One-Touch Keys 8 Confirm that is displayed, then press [OK]. 1-TOUCH SPD DIAL 2.HOST NAME 9 Enter the name of the file server on the network (120 characters maximum) using - [numeric keys], then press [OK]. If no DNS server is available, the host name setting should be specified using the IP address of the FTP server. Ex. HOST NAME :1 server1 10 Confirm that is displayed, then press [OK]. 1-TOUCH SPD DIAL 3.FILE PATH 11 Enter the file path to the folder to which the job is to be sent (120 characters maximum) using - [numeric keys], then press [OK]. Ex. FILE PATH :a server1/home/share 12 Confirm that is displayed, then press [OK]. 1-TOUCH SPD DIAL 4.LOGIN NAME 13 Enter the login name using - [numeric keys], then press [OK]. Ex. LOGIN NAME :a canon You can enter up to 24 characters for the login name. 14 Confirm that is displayed, then press [OK]. 1-TOUCH SPD DIAL 5.PASSWORD 15 Enter the password using - [numeric keys], then press [OK]. Ex. PASSWORD :a 123XXXX You can enter up to 24 characters (14 characters when is selected as the server protocol) for the password. To register another one-touch key, repeat the procedure from step 4. 16 Press [Stop] to return to the standby mode. 3-8