Canon imageRUNNER 1025 Series Basic Operation Guide - Page 49

Originals Requirements Originals and Print Media Available original type, size, weight and quantity are shown in the table below. Type Size (W × L) Platen Glass - Plain paper - Thick originals - Photographs - Small originals (e.g., index cards) - Special types of paper (e.g., tracing paper*1, transparencies*1, etc.) - Books (Depth: 7/8" (20 mm) maximum) 8 1/2" × 14" maximum (216 × 356 mm maximum) Weight 4.4 lb (2 kg) maximum Quantity 1 sheet ADF Plain paper (Multiple pages of originals of the same size, thickness and weight or one-page originals.) 8 1/2" × 14" maximum (216 × 356 mm maximum) 5 1/2" × 5" minimum (139.7 × 128 mm minimum) One-sided scanning (1 page): 13 to 34 lb bond (50 to 128 g/m2) Two-sided scanning: 13 to 28 lb bond (50 to 105 g/m2) 50 sheets maximum*2 (25 sheets maximum for LGL originals) *1 When copying transparent originals such as tracing paper or transparencies, use a piece of plain white paper to cover the original after placing it face-down on the platen glass. *2 21 lb bond (80 g/m2) paper ˔ Do not place the originals on the platen glass or in the ADF until the glue, ink or correction fluid on the originals are completely dry. ˔ Remove all fasteners (staples, paper clips, etc.) before loading the originals in the ADF. ˔ To prevent original jams in the feeder, do not use any of the following: • Wrinkled or creased paper • Carbon paper or carbon-backed paper • Curled or rolled paper • Coated paper • Torn paper • Onion skin or thin paper • Paper printed with a thermal transfer printer • Transparencies 2-2