Canon imageRUNNER 1025 Series Basic Operation Guide - Page 70
Registering File Server Addresses in One-Touch Keys
View all Canon imageRUNNER 1025 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 70 highlights
Registering Destinations in the Address Book (imageRUNNER 1025iF Only) Storing/Editing One-Touch Keys Registering File Server Addresses in One-Touch Keys This section describes the procedure for registering file server addresses in the one-touch keys. You cannot change the server protocol setting (FTP or SMB) of the destination registered in Address Book. To change the server protocol, cancel the registration once, then register with the correct server protocol again. 1 Press [Additional Functions]. 2 Press [ ] or [ ] to select , then press [OK]. ADD. FUNCTIONS 4.ADDRESS BOOK SET. If a password has been set for the Address Book, enter the password using - [numeric keys], then press [OK]. 3 Press [ ] or [ ] to select , then press [OK]. ADDRESS BOOK SET. 2.1-TOUCH SPD DIAL 4 Press [ ] or [ ] to select a one-touch key (01 to 23) for which you want to register the address, then press [OK]. 1-TOUCH SPD DIAL [01] NOT REGISTERED You can also select a one-touch key or coded dial code by pressing the corresponding onetouch key. 5 Press [ ] or [ ] to select the server protocol ( or ), then press [OK]. 1-TOUCH SPD DIAL FTP - : Select this protocol if you are sending documents to a computer running Sun Solaris 2.6 or later, Mac OS X, Internet Information Services 5.0 under Windows 2000 Server, Internet Information Services 5.1 under Windows XP Professional, Internet Information Services 6.0 under Windows 2003 Server/ Windows 2008 Server, Internet Information Services 7.0 under Windows Vista, or Red Hat Linux 7.2. - : Select this protocol if you are sending documents to a computer running UNIX/ Linux (Samba 2.2.8a or later), or Windows 2000/XP/Server 2003/Vista/Server 2008. 6 Confirm that is displayed, then press [OK]. Ex. 1-TOUCH 1.NAME SPD DIAL 7 Enter the destination's name (16 characters maximum) using - [numeric keys], then press [OK]. Ex. NAME :a FTP server 3-7