Canon imageRUNNER 1025 Series Basic Operation Guide - Page 303
Timer Settings, Append Cr To Lf
View all Canon imageRUNNER 1025 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 303 highlights
Settings Menu Setting Item Description Applicable Page 2. X DIMENSION 3. Y DIMENSION Specifies the horizontal size of the custom paper. (05.00-14.00" (127-356 mm)) Specifies the vertical size of the custom paper. (03.00-08.50" (76-216 mm)) e-Manual "Printer Settings from the Machine" 8. APPEND CR TO LF Sets whether to append a carriage return (CR) when line feed code (LF) is received. NO The print head moves down to the next line when line feed code is received, and the margin does not change (such as the beginning of the next line). YES The print head moves to the beginning of the next line when line feed code is received. 9. ENLARGE A4 Sets whether to expand the printable area of A4 size paper to that of Letter size in width. * This setting is applicable for A4 paper and portrait orientation for the PCL5 printing only. The PCL6 printing is not supported. OFF All the area on a page 1/8" (4.23 mm) from the top, bottom, left, and right edges is available for printing on A4 paper. ON All the area on a page 1/8" (4.23 mm) from the top and bottom edges and 1/8" (3.30 mm) from the left and right edges is available for printing on A4 paper. Only the width increases. 10. BarDIMM*2 Sets whether to use the bar code printing function. ENABLE Sets the bar code printing function to on. FreeScape OFF DISABLE Sets the bar code printing function to off. 11. RESET PRINTER Clears all print jobs in progress and resets the printer function. - OFF - ON *1 Only for users of the PCL Printer Kit. *2 This setting is available only if the bar code printing function is activated. TIMER SETTINGS Setting Item 1. DATE&TIME SETTING 2. TIME ZONE SETTING 3. DATE TYPE SELECT Description Sets the current date and time. Sets the time zone of your machine's location. Sets the date format. - MM/DD/YYYY - DD/MM YYYY - YYYY MM/DD Applicable Page p. 5-4 e-Manual "Introduction of the Machine" Machine Settings 14-20