Canon imageRUNNER 1025 Series Basic Operation Guide - Page 229
Starting the Remote UI
View all Canon imageRUNNER 1025 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 229 highlights
Starting the Remote UI To start the Remote UI, follow the procedure described below. Before you start the Remote UI, perform the following: - Select in located in the , and verify the IP address of the machine. If you do not know the IP address, consult with your network administrator. - Set to in . 1 Prepare the Network. Set up the machine for use in a network, then connect the machine and the Computer to your network router or a hub. For details, see "Set UP Computers and Software," in the Quick Start Guide. 4 Enter the required data. The required data differ depending on the authentication mode you are using. ˙In case of default settings: Select [Administrator Mode] or [End-User Mode]. Settings from a PC 2 Start the web browser. 3 Enter the IP address of the machine in [Address] or [Location], then press [Enter] on the keyboard. ᶄEnter the password or owner name and click [OK]. For details on how to check the IP address, see "Setting and Checking IP Address," in the eManual. The Remote UI screen appears. 10-4