Cisco 3825 Software Configuration Guide - Page 139
Related Commands, Command, Description
UPC - 746320981505
View all Cisco 3825 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 139 highlights
Appendix A Cisco 3825 Mobile Wireless Edge Router RAN-O Command Reference backup delay The following example shows an MPLS xconnect with one redundant peer. The switchover does not begin unless the Layer 2 Tunnel Protocol (L2TP) PW has been down for three seconds. After a switchover to the secondary VC occurs, there is no fallback to the primary until the primary VC has been reestablished and is up for ten seconds. Router# config t Router(config)# pseudowire-class mpls Router(config-pw-class)# encapsulation mpls Router(config-pw-class)# exit Router(config)# interface atm1/0/0 Router(config-if)# xconnect 10.0.0.1 50 pw-class mpls Router(config-if-xconn)# backup peer 10.0.0.2 50 Router(config-if-xconn)# backup delay 3 10 Router(config-if-xconn)# exit Router(config-if)# exit Router(config)# exit Related Commands Command backup peer Description Configures a redundant peer for a PW VC. OL-15667-03 Cisco 3825 Mobile Wireless Edge Router Software Configuration Guide A-7