Cisco SPA112 Administration Guide - Page 118
TR-069, Administration, Management > TR-069, Submit, Cancel, Enabled, Disabled - password
View all Cisco SPA112 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 118 highlights
Administration Settings Management 5 TR-069 Use the Administration > Management > TR-069 page to configure communication with an Auto-Configuration Server (ACS) via TR-069 CPE WAN Management Protocol (CWMP). To open this page: Click Administration in the menu bar, and then click Management > TR-069 in the navigation tree. Enter the settings as described below. After making changes, click Submit to save your settings, or click Cancel to abandon any unsaved entries. Field Description Status Click Enabled to enable remote provisioning, or click Disabled to disable this feature. The default setting is Disabled. ACS URL The URL for the ACS. The format should be http(s):// xxx.xxx.xxx.xxx:port or xxx.xxx.xxx.xxx:port. The xxx.xxx.xxx.xxx is the domain name or IP address of the ACS server. Both the IP address and the port number are required. ACS Username The username for the ACS. The default username is the Organization Unit Identifier (OUI). This value is required and must match the username configured on the ACS. ACS Password The password for the ACS. This value is required and must match the password configured on the ACS. Connection Request URL This field will be auto-filled and does not need to be entered manually. The format is http:// xxx.xxx.xxx.xxx:port. The xxx.xxx.xxx.xxx is the IP address for the INTERNET (WAN) interface. Connection Request Connection request username. This value must match Username the Connection Request Username configured on the ACS. Connection Request Connection request password. This value must match Password the Connection Request Password configured on the ACS. Cisco SPA100 Series Phone Adapters Administration Guide 118