Cisco SPA112 Administration Guide - Page 80

Control Timer Values sec, Ring Voltage: 80Vc

Get Cisco SPA112 PDF manuals and user guides View all Cisco SPA112 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 80 highlights

Configuring Voice Configuring Voice Settings 4 - Ring Frequency: 25 - Ring Voltage: 80Vc Field Description Ring Waveform Waveform for the ringing signal. Choices are Sinusoid or Trapezoid. Default setting: Sinusoid. Ring Frequency Frequency of the ringing signal. Valid values are 10-100 (Hz) Default setting: 20. Ring Voltage Ringing voltage. Choices are 60-90 (V) Default setting: 85. CWT Frequency Frequency script of the call waiting tone. All distinctive CWTs are based on this tone. Default setting: 440@-10. Synchronized Ring If this is set to Yes, when the ATA is called, all lines ring at the same time (similar to a regular PSTN line) After one line answers, the others stop ringing. Default setting: no. Control Timer Values (sec) Field Hook Flash Timer Min Hook Flash Timer Max Callee On Hook Delay Reorder Delay Call Back Expires Description Minimum on-hook time before off-hook qualifies as hookflash. Less than this the on-hook event is ignored. Range: 0.1-0.4 seconds. Default setting: 0.1. Maximum on-hook time before off-hook qualifies as hookflash. More than this the on-hook event is treated as onhook (no hook-flash event) Range: 0.4-1.6 seconds. Default setting: 0.9. Phone must be on-hook for at this time in sec. before the ATA will tear down the current inbound call. It does not apply to outbound calls. Range: 0-255 seconds. Default setting: 0. Delay after far end hangs up before reorder tone is played. 0 = plays immediately, inf = never plays. Range: 0-255 seconds. Default setting: 5. Expiration time in seconds of a call back activation. Range: 0-65535 seconds. Default setting: 1800. Cisco SPA100 Series Phone Adapters Administration Guide 80

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
Configuring Voice
Configuring Voice Settings
Cisco SPA100 Series Phone Adapters Administration Guide
80
4
-
Ring Frequency: 25
-
Ring Voltage: 80Vc
Control Timer Values (sec)
Field
Description
Ring Waveform
Waveform for the ringing signal. Choices are Sinusoid
or
Trapezoid.
Default setting: Sinusoid.
Ring Frequency
Frequency of the ringing signal. Valid values are 10–100 (Hz)
Default setting: 20.
Ring Voltage
Ringing voltage. Choices are
60–90
(V)
Default setting: 85.
CWT Frequency
Frequency script of the call waiting tone. All distinctive
CWTs are based on this tone. Default setting: 440@-10.
Synchronized
Ring
If this is set to Yes, when the ATA is called, all lines ring at the
same time (similar to a regular PSTN line) After one line
answers, the others stop ringing.
Default setting: no.
Field
Description
Hook Flash Timer
Min
Minimum on-hook time before off-hook qualifies as
hookflash. Less than this the on-hook event is ignored.
Range: 0.1–0.4 seconds. Default setting: 0.1.
Hook Flash Timer
Max
Maximum on-hook time before off-hook qualifies as
hookflash. More than this the on-hook event is treated as
onhook (no hook-flash event) Range: 0.4–1.6 seconds.
Default setting: 0.9.
Callee On Hook
Delay
Phone must be on-hook for at this time in sec. before the
ATA will tear down the current inbound call. It does not
apply to outbound calls. Range: 0–255 seconds. Default
setting:
0
.
Reorder Delay
Delay after far end hangs up before reorder tone is
played. 0 = plays immediately, inf = never plays. Range:
0–255 seconds. Default setting: 5.
Call Back Expires
Expiration time in seconds of a call back activation.
Range: 0–65535 seconds. Default setting: 1800.