Cisco SPA112 Administration Guide - Page 141

Using the IVR for Administration, IVR Actions, Option, Choices and Instructions, Set Static IP Address

Get Cisco SPA112 PDF manuals and user guides View all Cisco SPA112 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 141 highlights

Using the IVR for Administration B • If the menu is inactive for more than one minute, the IVR times out. You will need to re-enter the IVR menu by pressing the star key four times: ****. Your settings take effect after you hang up the telephone or exit the IVR. The ATA may reboot at this time. • To enter the decimal points in an IP address, press the * (star) key. For example, to enter the IP address 191.168.1.105, perform the following tasks: -Press these keys: 191*168*1*105 -Press the # (pound) key to indicate that you have finished entering the IP address. -Press 1 to save the IP address or press the * (star) key to cancel your entry and return to the main menu. IVR Actions IVR Action Enter IVR Menu Check Internet Addressing Method Set Internet Addressing Method Menu Option **** 100 101 Check Internet IP 110 Address (INTERNET port) Set Static IP Address 111 (INTERNET port) Check Network Mask 120 Choices and Instructions DHCP: 0 Static IP: 1 PPPoE: Press 2 Enter the IP address by using numbers on the telephone key pad. Use the * (star) key when entering a decimal point. Note: This option is available only after you choose Static IP as the Internet Connection Type, through option 101. Cisco SPA100 Series Phone Adapters Administration Guide 141

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
Using the IVR for Administration
Cisco SPA100 Series Phone Adapters Administration Guide
141
B
•
If the menu is inactive for more than one minute, the IVR times out. You will
need to re-enter the IVR menu by pressing the star key four times:
****
. Your
settings take effect after you hang up the telephone or exit the IVR. The ATA
may reboot at this time.
•
To enter the decimal points in an IP address, press the
*
(star) key.
For example, to enter the IP address 191.168.1.105, perform the following
tasks:
–Press these keys: 191
*
168
*
1
*
105
–Press the
#
(pound) key to indicate that you have finished entering the
IP address.
–Press
1
to save the IP address or press the
*
(star) key to cancel your
entry and return to the main menu.
IVR Actions
IVR Action
Menu
Option
Choices and Instructions
Enter IVR Menu
****
Check Internet
Addressing Method
100
Set Internet Addressing
Method
101
DHCP: 0
Static IP: 1
PPPoE: Press 2
Check Internet IP
Address (INTERNET port)
110
Set Static IP Address
(INTERNET port)
111
Enter the IP address by using
numbers on the telephone key pad.
Use the
*
(star) key when entering a
decimal point.
Note: This option is available only after
you choose Static IP as the Internet
Connection Type, through option 101.
Check Network Mask
120