Cisco SPA112 Administration Guide - Page 77

Configuring Voice Configuring Voice Settings 4 Field SIT4 Tone MWI Dial Tone Cfwd Dial Tone Holding Tone Conference Tone Secure Call Indication Tone Feature Invocation Tone Description Alternative to the Reorder Tone played when an error occurs as a caller makes an outbound call. The RSC to trigger this tone is configurable on the SIP screen. Default setting: 985@-4,1371@-4,1777@-4;20(.380/0/ 1,.274/0/2,.380/0/3,0/4/0) Played instead of the Dial Tone when there are unheard messages in the caller's mailbox. Default setting: 350@5,440@-5;2(.1/.1/1+2);10(*/0/1+2) Played when all calls are forwarded. Defaultsetting: 350@-5,440@-5;2(.2/.2/1+2);10(*/0/1+2) Informs the local caller that the far end has placed the call on hold. Default setting: 600@-5;*(.1/.1/1,.1/.1/1,.1/9.5/ 1) Played to all parties when a three-way conference call is in progress. Default setting: 350@-5;20(.1/.1/1,.1/9.7/1) Played when a call has been successfully switched to secure mode. It should be played only for a short while (less than 30 seconds) and at a reduced level (less than -19 dBm) so it does not interfere with the conversation. Default setting: 397@-5,507@-5;15(0/2/0,.2/.1/1,.1/2.1/2) Played when a feature is implemented. Default setting: 350@-4;*(.1/.1/1) Distinctive Ring Patterns Field Ring1 Cadence Ring2 Cadence Ring3 Cadence Ring4 Cadence Description Cadence script for distinctive ring 1. Default setting: 60(2/4) Cadence script for distinctive ring 2. Default setting: 60(.8/.4,.8/4) Cadence script for distinctive ring 3. Default setting: 60(.4/.2,.4/.2,.8/4) Cadence script for distinctive ring 4. Default setting: 60(.3/.2,1/.2,.3/4) Cisco SPA100 Series Phone Adapters Administration Guide 77