Cisco SPA112 Administration Guide - Page 96
Configuring Voice, Dial Plan Entry, Functionality, Field, Description, NAT Settings
View all Cisco SPA112 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 96 highlights
Configuring Voice Configuring Voice Settings 4 *1xxxxxxxxxx
Configuring Voice
Configuring Voice Settings
Cisco SPA100 Series Phone Adapters Administration Guide
96
4
*1xxxxxxxxxx<:@fwd.pulver.com;nat;uid=jsmith;pwd=xyz
The syntax for a dial plan expression is described in the table below.
NAT Settings
Dial Plan Entry
Functionality
*xx
Allow arbitrary 2 digit star code
[3469]11
Allow x11 sequences
0
Operator
00
Int’l Operator
[2-9]xxxxxx
US local number
1xxx[2-9]xxxxxx
US 1 + 10-digit long distance number
xxxxxxxxxxxx.
Everything else
Field
Description
NAT Mapping Enable
To use externally mapped IP addresses and SIP/
RTP ports in SIP messages, select yes.
Otherwise, select no. Default setting: no.
NAT Keep Alive Enable
To send the configured NAT keep alive message
periodically, select yes. Otherwise, select no.
Default setting: no.
NAT Keep Alive Msg
Enter the keep alive message that should be sent
periodically to maintain the current NAT mapping.
If the value is $NOTIFY, a NOTIFY message is
sent. If the value is $REGISTER, a REGISTER
message without contact is sent. Default setting:
$NOTIFY.
NAT Keep Alive Dest
Destination that should receive NAT keep alive
messages. If the value is $PROXY, the messages
are sent to the current proxy server or outbound
proxy server. Default setting: $PROXY.
EXT SIP Port
The external SIP port number.