Cisco SPA112 Administration Guide - Page 82
Vertical Service Activation Codes, Cfwd All Deact Code
View all Cisco SPA112 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 82 highlights
Configuring Voice Configuring Voice Settings 4 Field CPC Duration Description Duration in seconds for which the tip-to-ring voltage is removed after the caller hangs up. After that, tip-to-ring voltage is restored and dial tone applies if the attached equipment is still off-hook. CPC is disabled if this value is set to 0. Range: 0 to 1.000 second. Resolution is 0.001 second. Default setting: 0 (CPC disabled) Vertical Service Activation Codes Vertical Service Activation Codes are automatically appended to the dial-plan. There is no need to include them in dial-plan, although no harm is done if they are included. Field Description Call Return Code Call Return Code This code calls the last caller. Default setting: *69. Call Redial Code Redials the last number called. Default setting: *07. Blind Transfer Code Begins a blind transfer of the current call to the extension specified after the activation code. Default setting: *98. Call Back Act Code Starts a callback when the last outbound call is not busy. Default setting: *66. Call Back Deact Code Cancels a callback. Default setting: *86. Call Back Busy Act Code Starts a callback when the last outbound call is busy. Default setting: *05. Cfwd All Act Code Forwards all calls to the extension specified after the activation code. Default setting: *72. Cfwd All Deact Code Cancels call forwarding of all calls. Default setting: *73. Cfwd Busy Act Code Forwards busy calls to the extension specified after the activation code. Default setting: *90. Cfwd Busy Deact Code Cancels call forwarding of busy calls. Default setting: *91. Cisco SPA100 Series Phone Adapters Administration Guide 82