Cisco SPA112 Administration Guide - Page 119
SNMP, SNMP commands from SNMP Network Management Systems. It supports - download
View all Cisco SPA112 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 119 highlights
Administration Settings Management 5 Field Periodic Inform Interval Periodic Inform Enable Request Download Description The periodic inform interval. The default value is 86400 seconds. Click Enabled to enable this feature, or click Disabled to disable it. If applied, ACS may call the Download RPC after it receives the request from the ATA. SNMP Use the Administration > Management > SNMP page to set up Simple Network Management Protocol (SNMP) for the ATA. SNMP is a network protocol that allows network administrators to manage, monitor, and receive notifications of critical events as they occur on the network. The ATA supports SNMPv2 and SNMPv3. It acts as an SNMP agent that replies to SNMP commands from SNMP Network Management Systems. It supports the standard SNMP get, next, and set commands. It also generates SNMP traps to notify the SNMP manager when configured alarm conditions occur. Examples include reboots, power cycles, and INTERNET (WAN) events. To open this page: Click Administration in the menu bar, and then click Management > SNMP in the navigation tree. Enter the settings as described below. After making changes, click Submit to save your settings, or click Cancel to abandon any unsaved entries. Settings for SNMPv2 Field Enabled, Disabled Trusted IP Get Community Description Click Enabled to enable this feature, or click Disabled to disable it. The default setting is Disabled. Choose Any to allow access from any IP address (not recommended). Click Address to specify the IP address and subnet mask of a single SNMP manager or trap agent that can access the ATA through SNMP. Enter a community string for authentication for SNMP GET commands. The default value is public. Cisco SPA100 Series Phone Adapters Administration Guide 119