Cisco SPA112 Administration Guide - Page 90
Line 1 and Line 2 Settings (PHONE1 and PHONE2), SIP ToS/DiffServ Value - open ports udp
View all Cisco SPA112 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 90 highlights
Configuring Voice Configuring Voice Settings 4 Field Feature Invocation Method Description Select the method you want to use, Default or Sweden default. Default setting: Default. Line 1 and Line 2 Settings (PHONE1 and PHONE2) Use the Voice > Line 1 and Voice > Line 2 pages to configure the settings for voice services through the PHONE1 and PHONE2 ports. To open this page: Click Voice on the menu bar, and then click Line 1 or Line 2 in the navigation tree. NOTE In a configuration profile, the FXS parameters must be appended with the appropriate numeral (for example, [1] or [2]) to identify the port to which the setting applies. Enter the settings as described below. After making changes, click Submit to save your settings, or click Cancel to abandon any unsaved entries. Line Enable Field Line Enable Network Settings Description To enable this line for service, select yes. Otherwise, select no. Default setting: Yes Field SIP ToS/DiffServ Value SIP CoS Value [0-7] RTP ToS/DiffServ Value RTP CoS Value [0- 7] Description TOS/DiffServ field value in UDP IP packets carrying a SIP message. Default setting: 0x68. CoS value for SIP messages. Default setting: 3. ToS/DiffServ field value in UDP IP packets carrying RTP data. Default setting: 0xb8. CoS value for RTP data. Default setting: 6. Cisco SPA100 Series Phone Adapters Administration Guide 90