Dell PowerVault 56F Dell PowerVault 51F 8-Port Fibre Channel Switch Insta - Page 100

LSDbShow

Page 100 highlights

LSDbShow The LSDbShow command displays domain Link State Database entries. The database record for any fabric switch can be displayed from any switch. It also gives the same information regardless of switch used to run it (unless there is a database update in progress, which occurs every 30 minutes in a stable network). Every switch keeps a database of topology information associated with itself and the other fabric switches. The topology information for a switch consists of all neighbors that are in NB_ST_FULL state and the associated port numbers. This replicated database remains in sync at all times, so that every switch in the fabric has the same topology view. The topology database, in turn, is used to compute the path from a switch to all other fabric switches. With no parameters, the command shows all the Link State Records in the database. The fields are described in Table 4-22. The command syntax is LSDbShow . Table 4-22 describes LSDbShow command fields. Table 4-22. LSDbShow Command Field Descriptions Field Description self Indicates that domain 1 is the local switch's domain ID. installTime This is the database entry for domain 1. installTime is the time when this database record was installed, in milliseconds from boot. Values are in hexadecimal and decimal format. lsAge The record age in seconds since installation time. Records are refreshed throughout the fabric every 30 minutes, and this value should never exceed 3600. When lsAge reaches the value 1800, the record is flushed from the fabric if the switch that is described by the LSR is functioning and is connected to the fabric. options Options is currently set to 0. lsId The record's Link State ID, equal to the switch's domain ID as described by the record. incarn The incarnation number. When a record is refreshed, every 30 minutes, its incarnation number is incremented by 1. If data in the record changes (for example, if an E_Port on a switch goes offline), the switch described by that record issues a new instance, and increments the incarnation number by 1. length The total record length. chksum The record checksum. It includes all fields except lsAge. 4-38 Dell PowerVault 51F 8-Port Fibre Channel Switch Installation and Troubleshooting Guide

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156

4-38
Dell PowerVault 51F 8-Port Fibre Channel Switch Installation and Troubleshooting Guide
LSDbShow
The
LSDbShow
command displays domain Link State Database entries. The data-
base record for any fabric switch can be displayed from any switch. It also gives the
same information regardless of switch used to run it (unless there is a database
update in progress, which occurs every 30 minutes in a stable network).
Every switch keeps a database of topology information associated with itself and the
other fabric switches. The topology information for a switch consists of all neighbors
that are in NB_ST_FULL state and the associated port numbers.
This replicated database remains in sync at all times, so that every switch in the fabric
has the same topology view. The topology database, in turn, is used to compute the
path from a switch to all other fabric switches.
With no parameters, the command shows all the Link State Records in the database.
The fields are described in Table 4-22.
The command syntax is
LSDbShow <domain ID>
.
Table 4-22 describes LSDbShow command fields.
Table 4-22.
LSDbShow Command Field Descriptions
Field
Description
self
Indicates that domain 1 is the local switch’s domain ID.
installTime
This is the database entry for domain 1. installTime is the time
when this database record was installed, in milliseconds from
boot. Values are in hexadecimal and decimal format.
lsAge
The record age in seconds since installation time. Records are
refreshed throughout the fabric every 30 minutes, and this value
should never exceed 3600. When lsAge reaches the value 1800,
the record is flushed from the fabric if the switch that is
described by the LSR is functioning and is connected to the
fabric.
options
Options is currently set to 0.
lsId
The record’s Link State ID, equal to the switch’s domain ID as
described by the record.
incarn
The incarnation number. When a record is refreshed, every
30 minutes, its incarnation number is incremented by 1. If data in
the record changes (for example, if an E_Port on a switch goes
offline), the switch described by that record issues a new
instance, and increments the incarnation number by 1.
length
The total record length.
chksum
The record checksum. It includes all fields except lsAge.