Dell PowerVault 56F Dell PowerVault 51F 8-Port Fibre Channel Switch Insta - Page 87
portLogClear, portLogDump, portStatsShow
View all Dell PowerVault 56F manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 87 highlights
support.dell.com Table 4-13. portErrShow Command Field Descriptions (continued) Field Description enc in Encoding errors inside of frames crc err Frames with CRC errors too shrt Frames shorter than minimum too long Frames longer than maximum bad eof Frames with bad end-of-frame delimiters enc out Encoding error outside of frames disc c3 Class 3 frames discarded link fail Link failures (LF1 or LF2 states) loss sync Loss of synchronization loss sig Loss of signal frjt Frames rejected with F_RJT fbsy Frames busied with F_BSY portLogClear The portLogClear command clears the data from the port log. The command syntax is portLogClear. portLogDump The portLogDump command prints the port log without page breaks. The command syntax is portLogDump. portStatsShow The portStatsShow command, when used with a port number, gives a static view of the port status when the switch executed the command. For example, to update the command and check if an error count is increasing, reissue the portStatsShow command to capture another snapshot. Fields for the portStatsShow command are described in Table 4-14. The command syntax is portStatsShow . Table 4-14. portStatsShow Command Field Descriptions Field Description stat_wtx Number of 4-byte words transmitted from the port. stat_wrx Number of 4-byte words received by the port. PowerVault 51F Commands 4-25