Dell PowerVault 56F Dell PowerVault 51F 8-Port Fibre Channel Switch Insta - Page 102

Table 4-23. nbrStateShow Command Field Descriptions (continued) Field Description Remote Port Corresponds to remPort in the neighbor data structure. State The neighbor's current state. Its value must be NB_ST_FULL for the ISL to forward frames to the adjacent switch. Other values may be transitory, however if a value is retained for more than ten seconds, contact Dell for technical assistance. routeHelp The following example shows the routeHelp command screen, which displays the routing help commands. switch:admin> routeHelp bcastShow fspfShow interfaceShow iodReset iodSet LSDbShow mcastShow nbrStateShow topologyShow uRouteConfig uRouteRemove uRouteShow Print broadcast tree information Print FSPF global information Print FSPF interface information Turns off the in-order delivery option Turns on the in-order delivery option Print Link State Database entry Print multicast tree information Print neighbor's summary information Print paths to domain(s) Configure static unicast route Remove static unicast route. Print port's unicast routing info topologyShow The topologyShow command displays all paths to a domain including: • Output port(s) used to route frames to the domain • The routing cost to reach the domain • The input ports routed through the output port The FSPF protocol supports equal cost multipaths, so there could be multiple parallel paths between two switches. The command syntax is topologyShow to list all domains. The command syntax is topologyShow to list the specified domain. 4-40 Dell PowerVault 51F 8-Port Fibre Channel Switch Installation and Troubleshooting Guide