Dell PowerVault 56F Dell PowerVault 51F 8-Port Fibre Channel Switch Insta - Page 148
Thermometer Error Message, Port has an internal loopback Fast Flashing Green LED
View all Dell PowerVault 56F manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 148 highlights
Diag_Flt: the port failed diagnostics (defective G_Port card or motherboard) Port is OK (Solid Green LED): The port is online and connected to a device over the cable. Port is segmented (Slow Flashing Green LED): Port is online but segmented. Please check for loopback cable or incompatible switch. Port has an internal loopback (Fast Flashing Green LED): The port is configured as a loopback port by diagnostics to verify the proper functioning of the internal Fibre Channel port logic and paths between the interface and the central memory. portEnable will put the port back online again. Port is sending data (Flickering Green LED): The port is online and transmitting/receiving frames. Thermometer Error Message Temperature out of range: One or more temperature sensors have exceeded the minimum or maximum allowed temperature reading (Minimum temperature is zero degrees Centigrade, maximum is 75o degrees Centigrade). A-10 Installation and Troubleshooting Guide