Dell PowerVault 56F Dell PowerVault 51F 8-Port Fibre Channel Switch Insta - Page 39
Installing the Cable-Management Arm,
View all Dell PowerVault 56F manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
Installing the Cable-Management Arm 1. From the back of the rack, pull the switch out about 7 centimeters (cm) (about 3 inches). The switch should lock in place. 2. Attach the end of the cable-management arm to the inner rail by inserting the two T-tabs into the two T- slots until the retaining clip snaps into place (see Figure 1-8). T-slots inner rail T-tabs retaining clip cable-management arm Velcro strips thumbscrew safety release latch Figure 1-8. Installing the Cable-Management Arm support.dell.com Installing the Dell PowerVault 51F Switch 1-11
support.dell.com
Installing the Dell PowerVault 51F Switch
1-11
Installing the Cable-Management Arm
1.
From the back of the rack, pull the switch out about 7 centimeters (cm) (about
3 inches).
The switch should lock in place.
2.
Attach the end of the cable-management arm to the inner rail by inserting the
two T-tabs into the two T- slots until the retaining clip snaps into place (see
Figure 1-8).
Figure 1-8.
Installing the Cable-Management Arm
Velcro strips
cable-management arm
T-tabs
T-slots
retaining clip
thumbscrew
inner rail
safety release latch