Dell PowerVault 56F Dell PowerVault 51F 8-Port Fibre Channel Switch Insta - Page 98
Table 4-21., Neighbor Data Structure Field Descriptions, interfaceShow Command Static Field
View all Dell PowerVault 56F manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 98 highlights
Table 4-20. interfaceShow Command Static Field Descriptions (continued) Field Description lastUpTime Last time this interface came up. downCount Number of times this interface went down. lastDownTime Last time this interface went down. downReason Reason (SCN) for the interface going down. iState The current interface state. It must be operational for the ISL to forward frames to the adjacent switch. Table 4-21. Neighbor Data Structure Field Descriptions Field Description state The current state of the neighbor. Its value must be NB_ST_FULL for the ISL to forward frames to the adjacent switch. nghbCap Neighbor capabilities. Currently always 0. nghbId The domain ID of the neighbor (adjacent) switch. idbNo The port number. It should be equal to ifNo. remPort The port number on the remote switch connected to this port. inactTo The inactivity time out, in milliseconds (ms). When this timeout expires, the adjacency with the neighbor switch is considered broken. When that happens, new paths are computed to all the possible destination switches in the fabric. helloTo The Hello timeout. When this timeout expires, a Hello frame is sent to the neighbor switch through this port. rXmitTo The retransmit timeout. It is used to reliably transmit topology information to the neighbor switch. If an acknowledge is not received within rXmitTo, a frame is retransmitted. nCmdAcc The total number of commands accepted from the neighbor switch. It includes Hellos, Link State Updates and Link State Acknowledges. nInvCmd The number of invalid commands received from the neighbor switch. These are commands with a version higher than the one running on the local switch. The current version is 1 and there is no version 0. nHloIn The number of Hello frames received from the neighbor switch. nInvHlo The number of Hello frames with invalid parameters received from the neighbor switch. 4-36 Dell PowerVault 51F 8-Port Fibre Channel Switch Installation and Troubleshooting Guide