Dell PowerVault 56F Dell PowerVault 51F 8-Port Fibre Channel Switch Insta - Page 107
Front-Panel LED Port Indicators, Table 5-1.
View all Dell PowerVault 56F manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 107 highlights
support.dell.com Table 5-1. Front-Panel LED Status Indicators Front-Panel LEDs Definition No light showing Power not applied. Steady power LED Normal power-on indicator. Flashing power LED Switch failed POST and is not functioning, although power is applied. Front-Panel LED Port Indicators The color and flash speed of each port's LED, as described in Table 5-2, indicates the individual port's status. Table 5-2. Front-Panel LED Port Status Indicators Front-Panel LEDs Definition No light showing No light or signal carrier (no module, no cable) for media interface LEDs. Steady yellow Receiving light or signal carrier, but not yet online. Slow yellow Disabled (result of diagnostics or portDisable command). Flashes every 2 seconds. Fast yellow Error, fault with port. Flashes every 1/2 second. Steady green Online (connected with device over cable). Slow green Flashes every 2 seconds. Interswitch link; the port is physically online, but the fabric remains segmented due to an incompatable switch or switch firmware. Fast green Internal loopback (diagnostic). Flashes every 1/2 second. Flickering green Online and frames flowing through port. Initialization Steps At power-on or reset, the following steps are executed: 1. Preliminary POST diagnostics. 2. VxWorks operating system initialization. 3. Hardware initialization (resets, internal addresses assigned to G_Port and FL_Port ASICs, serial port initialized, front panel initialized). 4. Full POST. 5. Universal port configuration. 6. Link initialization; receiver/transmitter negotiation to bring connected ports online. Troubleshooting 5-3