Dell PowerVault 56F Dell PowerVault 51F 8-Port Fibre Channel Switch Insta - Page 68
con Table 4-3., aliasShow Command Field Descriptions
View all Dell PowerVault 56F manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 68 highlights
Table 4-3. aliasShow Command Field Descriptions Field Description Alias ID This is the multicast address and has the format of FFFBxx, where xx is an odd number ranging from 01 to 31. This number is the name of the multicast group. Creator The Fibre Channel address ID of the Nx_Port that created this Alias group. Creator Token The Alias token that has been provided to map to the Alias group. It consists of four subfields: rb = Routing bits type = Upper level application type grptype = The alias group type (can only be 10 for multicast) qlfr = Alias Qualifier of the group These subfields are delimited by a pair of square braces. Member List For more information about Alias Token, see the FC-PH-2 and FC-GS-2 American National Standards Institute (ANSI) standards. A list of member address IDs, delimited by a pair of curly braces. configure Figures 4-1 through 4-3 show examples of the configure command, which is used to set some switch configuration parameters. This command may not be executed on an enabled switch; you must first disable the switch using the switchDisable command. The configure command is navigated by entering a series of collapsible top-level menus. Each menu divides up the various switch configuration parameters into logical groupings, which include: fabric parameters, virtual channel parameters, arbitrated loop parameters, and system service parameters. Each top level menu and its associated submenus consist of a text prompt, a list of acceptable values, and the current value (shown in brackets). The current value is used in the absence of an entered value when a carriage return is the only input 4-6 Dell PowerVault 51F 8-Port Fibre Channel Switch Installation and Troubleshooting Guide