Dell PowerVault 56F Dell PowerVault 51F 8-Port Fibre Channel Switch Insta - Page 65
Table 4-2., agtcfgDefault Command Field Descriptions, agtcfgDefault, swEventTrap
View all Dell PowerVault 56F manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 65 highlights
Community 4: public (ro) No trap recipient configured yet Community 5: common (ro) No trap recipient configured yet Community 6: FibreChannel (ro) No trap recipient configured yet sw5:admin> Table 4-2 describes the fields for the agtcfgDefault command. Table 4-2. agtcfgDefault Command Field Descriptions Field Description sysDescr The system description (in MIB-II definition). The default value is set as Fibre Channel Switch. sysLocation The location of the system (switch) (in MIB-II). The default value is set as End User Premise. sysContact The contact information for this system (switch). The default value is set as Field Support. swEventTrapLevel The event trap level in conjunction with an event's severity level. When an event occurs and if its severity level is at or below the set value, the SNMP trap, swEventTrap, is sent to configured trap recipients. By default, this value is set at 0, implying that no swEventTrap is sent. Other possible values are: 0 = None 1 = Critical 2 = Error 3 = Warning 4 = Informational 5 = Debug See "errShow" found later in this chapter for related information. authTraps authenticationFailure (the authentication trap) is transmitted to the configured trap recipient in the event the agent received a protocol message that is not properly authenticated. In the context of SNMPv1 and SNMPv2c, this means that a request that contains a community string is not known to the agent. The default value for this parameter is 0 (disabled). support.dell.com PowerVault 51F Commands 4-3