Dell PowerVault 56F Dell PowerVault 51F 8-Port Fibre Channel Switch Insta - Page 142
bcastShow, portLogShow, LSDbAllShow, State Update has
View all Dell PowerVault 56F manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 142 highlights
Table A-1. Errors (continued) Module Error Severity Explanation HLO INVHLO (1) The path selection task has received a HELLO message with an invalid parameter from a neighbor switch. LSDB LSID (2) A Link State Record received as part of a Link State Update has an out of range domain ID. MCAST ADDBRANCH (2) A branch is being added to a broadcast or multicast tree, but the parameters are incorrect. ADDPORT (3) A multicast routing table programming failed. NOPARENT (2) An error occurred while computing a broadcast or multicast tree. NOPARENTLSR (2) An error occurred while computing a broadcast or multicast tree. REMPORT (3) Removing an entry from a multicast routing table failed. SPFCOST (3) An error occurred with computing the multicast path tree. Action Check that all paths and routing tables are correct. If they are not, reboot the neighbor switch. Check the paths and routes again. If they are still incorrect, reboot the local switch. Check that all paths are correct. If any path is missing to any switch in any part of the fabric, reboot the switch with the missing path. If this is caused by a configuration command, check the parameter values. Otherwise, check the broadcast tree with the bcastShow command. If the tree is incorrect, reboot the local switch. Run the portLogShow command. Contact Customer Support. Run the LSDbAllShow command. Contact Customer Support. Run the LSDbAllShow command. Contact Customer Support. Run the portLogShow command. Contact Customer Support. Run the LSDbAllShow command. Contact Customer Support. A-4 Installation and Troubleshooting Guide