Dell QLogic Family of Adapters QLogic QME8242 Mezzanine Card User's Guide - Page 19
Interface Specifications, Environmental Specifications
View all Dell QLogic Family of Adapters manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
Specifications: QLogic QME8242 Mezzanine Card User's Guide Second Generation FC Generic Services (FC-GS-2) Third Generation FC Generic Services (FC-GS-3) Interface Specifications Table 3. Interface Specifications Port Type Media 10G-BASE-KR Dell PE M1000e KR Midplane Revision 1.1 Environmental Specifications Table 4. Environmental Specifications Condition Operating Non-Operating Temperature Ranges (for Altitude ≤900 m or 2952.75 ft) 10 °C to 35 °C (50 to 95 °F) -40 °C to 65 °C (-40 °C to 149 °F) Temperature Ranges (for Altitude >900 m or 2952.75 ft) 10 °C to Note1 °C (50 °C to Note2°F) -40 °C to 65 °C (-40 °C to 149 °F) Temperature Gradient Maximum per 60 Min. 10 °C 20 °C Humidity Percent Ranges-Noncondensing 20 % to 80 %* (Max Wet bulb temperature= 29 °C)3 5 % to 95 %+ (Max Wet bulb temperature= 38 °C)3 Humidity Gradient Maximum per 60 Min. 10 % 10 % Altitude Ranges-Low Limits -15.2 m (-50 ft) -15.2 m (-50 ft) Altitude Ranges-High Limits 3,048 m (10,000 ft) 10,668 m (35,000 ft) Airborne Contaminants-ISA-71 Level G13 G13 Table Notes: 1 Use the following formulas to calculate the maximum operating temperature (in °C) for a specific altitude. Use the first formula if the altitude is stated in meters and the second formula if the altitude is stated in feet. 2 Use the following formulas to calculate the maximum operating temperature (in °F) for a specific altitude. Use the first formula if the altitude is stated in meters and the second formula if the altitude is stated in feet. 3 Maximum corrosive contaminant levels measured at ≤50% relative humidity; see Table 3 in ISA-71.04-1985. Please read all restrictions and disclaimers. Back to Contents Page file:///T|/htdocs/NETWORK/QLogic/71922/en/specs.htm[9/26/2012 4:25:26 PM]